AIG AI Manager (AIM)AIG AI Manager is a multipurpose tool for managing and installing your AI Traffic.
- Detect outdated/defunct flightplans
- Install/update flightplans/repaints/models (some features are OCI exclusive)
- Error detection
- Live-Timetables
- Supports AIGFP
One Click Installer (OCI)One Click Installer is a part of AIG AIM that will install flightplans/models/repaints with a single click. This process is done without violating any copyright. Basically the tool uses darabases to get the information needed to achive a full install. This is something never been done before, even WoAI had to includ all files needed in theier packages.
All models (if possible) will be installed as Prepar3Dv4 or v5 nativ models and all textures will be converted to DDS format. This will result in a fully optimized AI system.
OCI will not interfear with your "own" local install. OCI will be installed as a stand-alone addon for Prepar3Dv4+.
Please read the
Tutorial included in the zip archive.
Download: http://www.alpha-india.net/software/
If you are experiencing any issues please visit our
product support board (https://www.alpha-india.net/forums/index.php?board=251.0)
Changelog: ( F - Feature | C - Change | B - Bugfix | I - Improvement )
1.2.3.10- [ B ] Fixed bug causing repaints not to be installed correctly
[i]1.2.3.9[/i]
[list]
[li][ C ] Repaints of GA-C airplanes will get a default BJO-Parking code added if not already included (run verify to set the code for installed airplanes)[/li]
[li][ B ] Fixed bug causing OCI to install faulty cfg files in model updates[/li]
[/list]
[i]1.2.3.8[/i]
[list]
[li][ B ] Fixed bugs while updating OCI SimObject[/li]
[/list]
[i]1.2.3.7[/i]
[list]
[li][ C ] Some smaller UI changes[/li]
[li][ C ] Removed FSX and FSX:SE from Dropdown selection on startup[/li]
[li][ B ] Fixed an issue for some older URLs on servers that are now offline[/li]
[/list]
[i]1.2.3.6[/i]
[list]
[li][ C ] Smaller changes to the UI[/li]
[/list]
[i]1.2.3.5[/i]
[list]
[li][ I ] Added support for new DynFP features[/li]
[li][ B ] Several smaller bug fixes
[/list]
[i]1.2.3.2[/i]
[list]
[li][ I ] Added two "fail-safe" checks to prevent users from accidentally remove the OCI addon[/li]
[/list]
[i]1.2.3.0[/i]
[list]
[li][ C ] Some smaller changes to DynFP for release[/li]
[/list]
[i]1.2.2.14[/i]
[list]
[li][ B ] Fixed in some cases non working UI Progress-Bar on Model-Update[/li]
[li][ B ] Fixed in some cases crash after Verify-Setup[/li]
[/list]
[i]1.2.2.13[/i]
[list]
[li][ F ] Added DynFP support[/li]
[li][ F ] Added support for generic OCI paints[/li]
[li][ F ] Added support for new AIG VisLib[/li]
[li][ F ] Added support for new AIG Model structure[/li]
[li][ B ] Smaller bug fixes[/li]
[/list]
[i]1.2.0.16[/i]
[list]
[li][ C ] Adjusted Log-File output for better error identification[/li]
[li][ B ] Fixed issue with P3Dv6 Model installations[/li]
[/list]
[i]1.2.0.14[/i]
[list]
[li][ B ] Fixed endless loop caused by faulty ModelBehavior-File on the server[/li]
[/list]
[i]1.2.0.13[/i]
[list]
[li][ B ] Several crash fixes[/li]
[/list]
[i]1.2.0.9[/i]
[list]
[li][ F ] Added support for atc_id-Fltsim entry for special liveries. (Run verify Setup to fix your current installation)[/li]
[li][ C ] Adjusted airline-logo loading to reduce load on the Webserver[/li]
[/list]
[i]1.2.0.6[/i]
[list]
[li][ B ] Fixed issues preventing the a bulk install for fixing missing repaints[/li]
[li][ B ] Fixed UI issue always shwoing the SimObject update button in P3D[/li]
[/list]
[i]1.2.0.5[/i]
[list]
[li]Major rework of the OCI process[/li]
[/list]
[i]1.1.1.12[/i]
[list]
[li][ B ] Fixed issues preventing the update of the AIG Effects (MSFS only)[/li]
[/list]
[i]1.1.1.11[/i]
[list]
[li][ F ] Added support for new MSFS native Sounds by FSim+[/li]
[li][ B ] Fixed issues during verify setup for some MSFS SimObjects[/li]
[/list]
[i]1.1.1.10[/i]
[list]
[li][ B ] Fixed issue with payware model installations[/li]
[/list]
[i]1.1.1.9[/i]
[list]
[li][ I ] Improved OCI installation for Repaints containing P3D and MSFS textures[/li]
[li][ I ] Improved "Verify Setup" logic to identify errors inside the OCI installation[/li]
[li][ B ] Smaller Bug fixes in the backend[/li]
[/list]
[i]1.1.1.7[/i]
[list]
[li][ F ] Added support for AIG VisLib (needed for future model updates in MSFS)[/li]
[li][ B ] Smaller Bug fixes in the backend[/li]
[/list]
[i]1.0.2.18[/i]
[list]
[li][ B ] Smaller Bug fixes[/li]
[/list]
[i]1.0.2.17[/i]
[list]
[li][ B ] Smaller Bug fixes[/li]
[/list]
[i]1.0.2.14[/i]
[list]
[li][ B ] Smaller Bug fixes[/li]
[/list]
[i]1.0.2.13[/i]
[list]
[li][ B ] Fixed an error in the OCI-Airport installation[/li]
[/list]
[i]1.0.2.12[/i]
[list]
[li][ I ] Improved AIGTC Airport-File installation for 3rd party airports[/li]
[/list]
[i]1.0.2.11[/i]
[list]
[li][ C ] Removed ImageTool requirement to keep Windows 11 support[/li]
[li][ I ] Improved SimObject Update speed[/li]
[/list]
[i]1.0.2.10[/i]
[list]
[li][ B ] Fixed faulty repaint installation[/li]
[/list]
[i]1.0.2.9[/i]
[list]
[li][ B ] Fixed CTD caused by Cookie Window[/li]
[li][ B ] Fixed Cache generation[/li]
[/list]
[i]1.0.2.8[/i]
[list]
[li][ B ] Fixed ORBX Pack installation[/li]
[/list]
[i]1.0.2.7[/i]
[list]
[li][ B ] Fixed extra " " on some fltsim tiltes[/li]
[/list]
[i]1.0.2.6[/i]
[list]
[li][ B ] fixed missing atc_heavy (requires to run verify again)[/li]
[/list]
[i]1.0.2.5[/i]
[list]
[li][ C ] Workaround added for atc_heavy Bug in P3D (requires to run verify again)[/li]
[/list]
[i]1.0.2.4[/i]
[list]
[li][ B ] Fixed CTD on verify setup[/li]
[/list]
[i]1.0.2.3[/i]
[list]
[li][ B ] Fixed faulty ui_createdby entry (Verify will repair the faulty once)[/li]
[/list]
[i]1.0.2.2[/i]
[list]
[li][ I ] Chaged UI for payware-selection in OCI Settings[/li]
[li][ I ] AIM is identifing missing textures in OCI now and removes the fltsim entry. So a reinstall is forced to get the correct repaint.[/li]
[li][ B ] Fixed Bug that causes invalid AIG.xml files[/li]
[/list]
[i]1.0.2.1[/i]
[list]
[li][ B ] Fixed Bug that causes missing fltsim-tiles in OCI when the replacement uses switch-words[/li]
[/list]
[i]1.0.2.0[/i]
[list]
[li][ F ] Option added to skip airport-check for non OCI flightplan on startup (Settings->Flightplan Settings)[/li]
[li][ C ] UI Changes during the OCI installation and the detailed flightplan window[/li]
[li][ I ] Improved SimObject Verification performance[/li]
[li][ B ] Fixed bugs that happend in the beckend when updating from v4 to v5 models (run verify setup to get the repair)[/li]
[li][ B ] Fixed a bug that cuases problems when windows was not installed on C:\[/li]
[li][ B ] Fixed missing UTC Time for LiveTimetable[/li]
[/list]
Changelog Entries 1.0.1.X:
[i]1.0.1.29[/i]
[list]
[li][ B ] Fixed AIGFP saving[/li]
[/list]
[i]1.0.1.28[/i]
[list]
[li][ C ] Removed all support for MAIW hosted/developed models (incl. PAI C-17 / JYAI BE300 / JYAI H145 / MKAI CASA C-295)[/li]
[/list]
[i]1.0.1.27[/i]
[list]
[li][ F ] Option to skip manual downloads during bulk installation of OCI[/li]
[li][ C ] Smaller UI Changes[/li]
[li][ B ] Fixed CTD on startup because of WCF[/li]
[li][ B ] General fixes in the backend core files (AIGCommon)[/li]
[/list]
[i]1.0.1.26[/i]
[list]
[li][ C ] Added new online source for flightplans (AIG FTP for Military)[/li]
[li][ B ] Fixed CTD on startup[/li]
[/list]
[i]1.0.1.25[/i]
[list]
[li][ B ] Fixed CTD on startup[/li]
[li][ B ] Fixed faulty model installation in cases the fileextension was "AIR"[/li]
[/list]
[i]1.0.1.24[/i]
[list]
[li][ I ] Improved self repair function for corrupted simobjects[/li]
[li][ C ] Increased timer limit for addon airport collector[/li]
[/list]
[i]1.0.1.23[/i]
[list]
[li][ I ] Added UI support for "Shift+Left Click" in the online flightplan list[/li]
[li][ B ] Fixed failing Airport-Code fix on startup[/li]
[/list]
[i]1.0.1.22[/i]
[list]
[li][ F ] Autodetection if LongPath is not enabled, incl. option to enable it.[/li]
[li][ I ] Improved Addon-Airport loading.[/li]
[li][ I ] Reduced cache size for airports.[/li]
[li][ I ] Improved UI/Info regarding ORBX-Pack.[/li]
[li][ B ] Fixed bug that causes problem when ORBX should not be used.[/li]
[li][ B ] Fixed a CTD when loading a flightplan.[/li]
[/list]
[i]1.0.1.21[/i]
[list]
[li][ I ] Improved reading Airport BGL files[/li]
[/list]
[i]1.0.1.20[/i]
[list]
[li][ B ] Fixed CTD/endless loop "Loading Flightplans"[/li]
[/list]
[i]1.0.1.19[/i]
[list]
[li][ B ] Install Flightplan as AIGFP will now close the window[/li]
[li][ B ] Fixed some CTD crashes in the UI[/li]
[/list]
[i]1.0.1.18[/i]
[list]
[li][ B ] Bug fixed that cause crash for OCI installation[/li]
[/list]
[i]1.0.1.17[/i]
[list]
[li][ B ] Bug fixed that cause crash for OCI installation[/li]
[li][ B ] Bug fixed on Startup (reading BGL or AIGFP)[/li]
[/list]
[i]1.0.1.16[/i]
[list]
[li][ B ] Bug fixed with the FSP 787[/li]
[/list]
[i]1.0.1.15[/i]
[list]
[li][ B ] Bug fixed that could cause reinstall of all airlines when running verify setup[/li]
[/list]
[i]1.0.1.14[/i]
[list]
[li][ B ] Bug fixed regarding FSP freeware models beeing updated to payware[/li]
[/list]
[i]1.0.1.13[/i]
[list]
[li][ B ] Bug fixed regarding AIGFP filenames on manual installation[/li]
[/list]
[i]1.0.1.12[/i]
[list]
[li][ C ] Upgraded backend for new Database[/li]
[li][ B ] Bug fixed regarding FS selection on startup (MSFS no longer selectable)[/li]
[li][ B ] Bug fixed regarding AIGFP filenames on manual installation[/li]
[/list]
[i]1.0.1.11[/i]
[list]
[li][ B ] Bug fixed regarding AIGFP filenames on manual installation[/li]
[/list]
[i]1.0.1.10[/i]
[list]
[li][ B ] Bug fixed that caused CTD on startup[/li]
[/list]
[i]1.0.1.9[/i]
[list]
[li][ B ] Bug fixed that could cause missing fltsims in OCI after AIM restart[/li]
[/list]
[i]1.0.1.8[/i]
[list]
[li][ I ] Improved ATC file handling[/li]
[/list]
[i]1.0.1.7[/i]
[list]
[li][ B ] Fixed a bug for FSX users, that caused no Flightplan to load[/li]
[/list]
[i]1.0.1.6[/i]
[list]
[li][ I ] Improved error detection on startuup for the OCI addon (Stuck at loading configuration)[/li]
[/list]
[i]1.0.1.5[/i]
[list]
[li][ I ] Series UI updates[/li]
[li][ B ] Smaller Bug fixes
[/list]
[i]1.0.1.4[/i]
[list]
[li][ B ] Fixed a bug for FSX users, that caused no SimObject/Flightplan to load[/li]
[/list]
[i]1.0.1.3[/i]
[list]
[li][ B ] Fixed a bug that could cause non OCI flightplan to get corrupted while recompiling with new Airport OCdes (if you have this problem please recompile with AIFP!)[/li]
[li][ B ] Fixed the Select Button for the ORBX Packs[/li]
[li][ B ] Fixed a bug that could prevent an OCI installation for some airlines[/li]
[/list]
[i]1.0.1.2[/i]
[list]
[li][ B ] Fixes a bug in the install process for AIGFP exclusive -> https://www.alpha-india.net/forums/index.php?topic=34310.0[/li]
[/list]
[i]1.0.1.1[/i]
[list]
[li][ C ] Improved logger for startup problems[/li]
[li][ B ] Minor UI fixes[/li]
[/list]
[i]1.0.1.0[/i]
[list]
[li][ F ] AIGFP Support[/li]
[li][ F ] OCI GVP File[/li]
[li][ F ] OCI Airport Installer[/li]
[li][ I ] Updated UI[/li]
[li][ B ] Many smaller bug fixes[/li]
[/list]
Changelog Entries 0.9 and older:
[i]0.9.5.0[/i]
[list]
[li][ C ] Update for the Softwareupdater[/li]
[/list]
[i]0.9.4.24[/i]
[list]
[li][ B ] Bugfix in relation to AILRP Effects[/li]
[/list]
[i]0.9.4.23[/i]
[list]
[li][ I ] improved GCmap handling[/li]
[/list]
[i]0.9.4.22[/i]
[list]
[li][ C ] UI Changes[/li]
[/list]
[i]0.9.4.21[/i]
[list]
[li][ I ] Added OCI Status-Report[/li]
[/list]
[i]0.9.4.20[/i]
[list]
[li][ I ] Fix case sensetivity for air files[/li]
[/list]
[i]0.9.4.19[/i]
[list]
[li][ I ] Improved Autorepair routine[/li]
[/list]
[i]0.9.4.18[/i]
[list]
[li][ F ] Autorepair missing fltsim titles[/li]
[/list]
[i]0.9.4.17[/i]
[list]
[li][ B ] Hotfix texture installation[/li]
[/list]
[i]0.9.4.16[/i]
[list]
[li][ B ] Hotfix for corrupted wing spans[/li]
[/list]
[i]0.9.4.15[/i]
[list]
[li][ B ] Hotfix for Databases[/li]
[li][ B ] Hotfix for Updater[/li]
[/list]
[i]0.9.4.14[/i]
[list]
[li][ I ] Disableing of duplicated effects when using FSReborn AI Lights Prof.[/li]
[/list]
[i]0.9.4.13[/i]
[list]
[li][ B ] Hotfix: sim detection P3Dv1-3[/li]
[/list]
[i]0.9.4.10 - 12[/i]
[list]
[li][ B ] Hotfix: faulty registry value name[/li]
[/list]
[i]0.9.4.9[/i]
[list]
[li][ B ] Fixed bug regarding P3D identification on startup[/li]
[/list]
[i]0.9.4.8[/i]
[list]
[li][ B ] Fixed crash when for FSX no SimObject-Directories were set[/li]
[/list]
[i]0.9.4.7[/i]
[list]
[li][ B ] Bug fix remove old ModelIDs[/li]
[/list]
[i]0.9.4.6[/i]
[list]
[li][ B ] Bug fix on startup when more then one simulator is installed, but last selected FS has been removed[/li]
[/list]
[i]0.9.4.5[/i]
[list]
[li][ B ] Fixes a possible bug that causes the remove of all SimObjects when migrating from P3Dv4 to P3Dv5[/li]
[/list]
[i]0.9.4.4[/i]
[list]
[li][ B ] Move OCI setup to another drive[/li]
[/list]
[i]0.9.4.3[/i]
[list]
[li][ B ] Fix Bug regarding freeware/payware settings for SimObjects[/li]
[/list]
[i]0.9.4.2[/i]
[list]
[li][ B ] Fix while detecting Installed FS Versions[/li]
[/list]
[i]0.9.4.1[/i]
[list]
[li][ B ]startup fix for autoupdater[/li]
[li][ B ]extended logger[/li]
[/list]
[i]0.9.4.0[/i]
[list]
[li][ F ]Added v5 Support (SimObjects have not been upgraded yet!)[/li]
[/list]
[i]0.9.3.15[/i]
[list]
[li][b]Note:[/b] P3Dv5 compability is still WIP and not included in this update[/li]
[li][ B ]Hotfix: cleaning cache for DB updates[/li]
[/list]
[i]0.9.3.14[/i]
[list]
[li][ B ]autofix for corrupted splitting process - verify[/li]
[/list]
[i]0.9.3.13[/i]
[list]
[li][ B ]hot fix for splitting routine in verify process[/li]
[/list]
[i]0.9.3.12[/i]
[list]
[li][ B ]fixes bug in splitting routine of verify process[/li]
[/list]
[i]0.9.3.11[/i]
[list]
[li][ B ]fixes index bug causing verify function to fail[/li]
[/list]
[i]0.9.3.10[/i]
[list]
[li][ B ]fltsim updates along with FP update (without paint install)[/li]
[li][ B ]fix for duplicated and fsx IDs in oci.xmls[/li]
[li][ B ]applying parking-type changes set in the FP[/li]
[li][ B ]fixes missing local texture fallback directories on verify process[/li]
[/list]
[i]0.9.3.9[/i]
[list]
[li][ B ]update didn't appear for renamed flightplans[/li]
[/list]
[i]0.9.3.8[/i]
[list]
[li][ B ] Fixes "Skip Model"-Install option[/li]
[li][ F ] Rescan addon airports button[/li]
[/list]
[i]0.9.3.7[/i]
[list]
[li][ B ] Oldest possible season set to 2008[/li]
[li][ I ] Modelupdate process has been reworked[/li]
[/list]
[i]0.9.3.6[/i]
[list]
[li][ B ] OCI setup corrupted message when faulty addon.cfg entries[/li]
[li][ I ] FSreborn handling[/li]
[/list]
[i]0.9.3.5[/i]
[list]
[li][ I ] Better FSReborn Lights Professional integration[/li]
[li][ B ] Bug fixes[/li]
[/list]
[i]0.9.3.4[/i]
[list]
[li][ B ] major Bugfix update simobject function -> Pls run verify/update SimObjects to fix it![/li]
[/list]
[i]0.9.3.3[/i]
[list]
[li][ B ] multiple general sections with MD-80 -> fixed after verify/update[/li]
[li][ B ] special characters in defunct list[/li]
[/list]
[i]0.9.3.2[/i]
[list]
[li][ C ] Check your update setting for Forum Members flightplans[/li]
[li][ F ] Preparation for OCI-GA Flightplans[/li]
[li][ B ] General Bug-fixes[/li]
[/list]
[i]0.9.3.1[/i]
[list]
[li][ B ] Hotfix forum crawler[/li]
[/list]
[i]0.9.3.0[/i]
[list]
[li][ F ] New user flightplan topic available for OCI - Check your "Flightplan Update" settings to enable![/li]
[li][ F ] Move AIGAIM Addon function added[/li]
[li][ B ] Several Bugfixes[/li]
[/list]
[i]0.9.2.14[/i]
[list]
[li][ B ] Replacements will be set as unassigned during OCI[/li]
[li][ B ] Fixed FPDatabase.xml loading error[/li]
[li][ I ] Repaint reinstalls everytime/on season update [/li]
[/list]
[i]0.9.2.13[/i]
[list]
[li][ B ] fixes logolight issue with FSPXAI models - pls run verify/update SImObjects to fix it[/li]
[/list]
[i]0.9.2.12[/i]
[list]
[li][ B ] fixes a missing file in the previouse release[/li]
[/list]
[i]0.9.2.11[/i]
[list]
[li][ B ] When removing unused Fltsims the texture directory is only deleted when it is not used by any other Fltsim-Entry[/li]
[li][ B ] Workaround for duplicated titles on some ends in bulk update funktion[/li]
[/list]
[i]0.9.2.10[/i]
[list]
[li][ F ] Updated Soundpack added[/li]
[/list]
[i]0.9.2.9[/i]
[list]
[li][ F ] Added Export-Function for missing fltsim-titles[/li]
[li][ B ] AILRPE compability after cfg-update fixed (After Model-Update AILRPE needs to rescan!)[/li]
[li][ B ] unused fltsim not casesensitiv for title[/li]
[li][ C ] Renumbering will ignore from now on the default SimObject directories[/li]
[li][ I ] LOG Remove Assigned Fltsim-Entry & Removed Assigned Fltsim-Entry as stack trace[/li]
[li][ I ] Reworked parts of the Fltsim-Error Check and added "atc_parking_type"-Check[/li]
[/list]
[i]0.9.2.8[/i]
[list]
[li]Bugfix: Modelupdate from AIM-Models[/li]
[li]Feature: Added support for FPDatabase.xml for manual installation[/li]
[/list]
[i]0.9.2.8[/i]
[list]
[li]Bugfix: Modelupdate from AIM-Models[/li]
[li]Feature: Added support for FPDatabase.xml for manual installation[/li]
[/list]
[i]0.9.2.7[/i]
[list]
[li]Bugfix: JCAI missing forum flightplans in onlinelist[/li]
[li]Bugfix: Improved Addon Airport detection[/li]
[/list]
[i]0.9.2.6[/i]
[list]
[li]Bugfix: Autoupdater
[b]IMPORTANT:[/b] If you update from [u]0.9.2.4[/u] pls manually download the zip file from the link above and overwrite the existing files in your AIM directory.
For a very few users the autoupdater might fail in 0.9.2.5 as well - if you are affected pls do the same as for 0.9.2.4[/li]
[/list]
[i]0.9.2.5[/i]
[list]
[li]Bugfix: duplicated titles flightplan update[/li]
[li]Bugfix: Autoupdater[/li]
[/list]
[i]0.9.2.4[/i]
[list]
[li]Smaller bugfixes[/li]
[li]enhanced logger[/li]
[/list]
[i]0.9.2.3[/i]
[list]
[li]Major Bugfix: unused Fltsim function removing too many entries[/li]
[/list]
[i]0.9.2.2[/i]
[list]
[li]Bugfix: more stable Soundpack download routine[/li]
[/list]
[i]0.9.2.1[/i]
[list]
[li]Bugfix: no oci.xml created for new SimObject[/li]
[/list]
[i]0.9.2.0[/i]
[list]
[li]Feature: added added support for AI sound pack[/li]
[li]Bugfix: model updater[/li]
[/list]
[i]0.9.1.4[/i]
[list]
[li]Bugfix: Model update[/li]
[/list]
[i]0.9.1.3[/i]
[list]
[li]Optimizations for model updater[/li]
[/list]
[i]0.9.1.2[/i]
[list]
[li]OCI-Model Update/Verification feature updated[/li]
[/list]
[i]0.9.1.1[/i]
[list]
[li]Bug fix: model updater[/li]
[/list]
[i]0.9.1.0[/i]
[list]
[li]fixes the auto-updater[/li]
[/list]
[i]0.9.0.7[/i]
[list]
[li]some bugfixes[/li]
[/list]
[i]0.9.0.6[/i]
[list]
[li]forgot to include a little bugfix[/li]
[/list]
[i]0.9.0.5[/i]
[list]
[li]few minor Bugfixes[/li]
[/list]
[i]0.9.0.4[/i]
[list]
[li]Bugfix forum crawler[/li]
[li]Warning for FS9 bgl on FSX/P3D systems[/li]
[/list]
[i]0.9.0.3[/i]
[list]
[li]Bugfix regarding the FPDatabase[/li]
[/list]
[i]0.9.0.2[/i]
[list]
[li]New Feature: Excluding ship traffic files[/li]
[li]minor bug fixes[/li]
[/list]
[i]0.9.0.1[/i]
[list]
[li]Bug fix: CTD OCI settings[/li]
[/list]
[i]0.9.0.0[/i]
[list]
[li]new feature: Live Timetable[/li]
[li]new feature: Cookie management[/li]
[li]new feature: enhanced payware settings[/li]
[li]new feature: move OCI folder[/li]
[li]update: revised manual flightplan installation[/li]
[li]update: detection FS9 traffic files[/li]
[li]update: status enhancement in flightplan list[/li]
[li]other bugfixes[/li]
[/list]
[i]0.8.5.6[/i]
[list]
[li]Preparations for 0.9.0.0.[/li]
[/list]
[i]0.8.5.5[/i]
[list]
[li]Bugfix: SimObjects without titles causing troubles[/li]
[/list]
[i]0.8.5.4[/i]
[list]
[li]Bugfix: UI update after FP update[/li]
[li]Bugfix: AIM require second start[/li]
[li]Bugfix: Addon component disabled[/li]
[/list]
[i]0.8.5.3[/i]
[list]
[li]added OCI flightplan topic: JCAI[/li]
[li]Bugfix: Refresh list after update install[/li]
[/list]
[i]0.8.5.2[/i]
[list]
[li]UI update: Available Online -> Updates[/li]
[li]Bugfix activity levels were not saved[/li]
[/list]
[i]0.8.5.1[/i]
[list]
[li]Bugfix for FS reborn lights check[/li]
[/list]
[i]0.8.5.0[/i]
[list]
[li]Activity Levels can be set up in setting now[/li]
[li]FS reborn lights check implemented (OCI only)[/li]
[li]bugfixes and UI updates[/li]
[/list]
[i]0.8.4.6[/i]
[list]
[li]Auto Check Online on startup[/li]
[li]minor UI updates[/li]
[li]bugfixes[/li]
[/list]
[i]0.8.4.5[/i]
[list]
[li]Bugfix: World scenery folder was not scanned properly[/li]
[/list]
[i]0.8.4.4[/i]
[list]
[li]Defunct Airline list added[/li]
[li]Bugfix: some scenery directories were not scanned[/li]
[li]some minor bugfixes[/li]
[/list]
[i]0.8.4.3[/i]
[list]
[li]Automated heavy setting for certain aircraft types[/li]
[li]Bugfix: Error checking[/li]
[/list]
[i]0.8.4.2[/i]
[list]
[li]Bugfix: StartUpScreen[/li]
[li]Bugfix: Deleting Fltsim entries in Error window[/li]
[/list]
[i]0.8.4.1[/i]
[list]
[li]Bugfix: model update (FSP A380 users pls read [url=https://www.alpha-india.net/forums/index.php?topic=28686.msg297631#msg297631][u][color=blue]update instructions[/color][/u][/url])[/li]
[/list]
[i]0.8.4.0[/i]
[list]
[li]Database FPs double entries cleaning[/li]
[li]Added ICAO to FP Info[/li]
[li]ModelUpdate UI mit Texture checker (status bar)[/li]
[li]some bugfixes[/li]
[/list]
[i]0.8.3.16[/i]
[list]
[li]minor bug fixes[/li]
[/list]
[i]0.8.3.15[/i]
[list]
[li]Bugfix Wingspan set to integer values (ft) -> Pls run "Update cfg" in OCI settings menu[/li]
[/list]
[i]0.8.3.14[/i]
[list]
[li]few bugfixes[/li]
[/list]
[i]0.8.3.13[/i]
[list]
[li]Bugfix: possible packing issue[/li]
[/list]
[i]0.8.3.12[/i]
[list]
[li]some bugfixes[/li]
[li]multithreading enabled again to improve startup performance[/li]
[/list]
[i]0.8.3.11[/i]
[list]
[li]Repair function set to work with AIGAIM titles only <-- pls check log when message appears if correct titles are found[/li]
[li]startup improved[/li]
[/list]
[i]0.8.3.10[/i]
[list]
[li]Repair function disabled[/li]
[/list]
[i]0.8.3.9[/i]
[list]
[li]Bug fix: Duplicates with TEMP repaints[/li]
[/list]
[i]0.8.3.8[/i]
[list]
[li]Bug fix: Force model update function[/li]
[/list]
[i]0.8.3.7[/i]
[list]
[li]Startup bugfix[/li]
[/list]
[i]0.8.3.6[/i]
[list]
[li]Stockairport list moved to Server - AIM will download the file on startup[/li]
[/list]
[i]0.8.3.5[/i]
[list]
[li]Major bugfix: removing repaints[/li]
[/list]
[i]0.8.3.4[/i]
[list]
[li]Major bugfix: removing flightplans[/li]
[/list]
[i]0.8.3.4[/i]
[list]
[li]Major bugfix: removing flightplans[/li]
[/list]
[i]0.8.3.3[/i]
[list]
[li]bugfix: repaint installation improved[/li]
[/list]
[i]0.8.3.2[/i]
[list]
[li]bugfix[/li]
[/list]
[i]0.8.3.1[/i]
[list]
[li]major bugfix[/li]
[li]reactivated backup of cfg files[/li]
[/list]
[i]0.8.3.0[/i]
[list]
[li]Added automatic update check on start up.[/li]
[li]workaround implemented for failed automatic downloads[/li]
[/list]
[i]0.8.2.13[/i]
[list]
[li]Added support for converted Wi17-18 Flightplans[/li]
[li]Updated user interface in "Flightplan Updates" menu[/li]
[li]minor UI updates[/li]
[li]some bugfixes[/li]
[li]IMPORTANT: Before you update to the new version remove the "Resources" folder from your AIM main folder![/li]
[/list]
[i]0.8.2.12[/i]
[list]
[li]Some bug fixes[/li]
[/list]
[i]0.8.2.11[/i]
[list]
[li]Bug fix: Forum Login window did not appear from crawler[/li]
[/list]
[i]0.8.2.10[/i]
[list]
[li]Bug fix: splitted fligtplans (TFS/FSP) not appearing in unassigned list[/li]
[/list]
[i]0.8.2.9[/i]
[list]
[li]Database update for remaining AIA 727 and RFSL CRJ series -->[u]IMPORTANT:[/u] Please read update information --> [url=https://www.alpha-india.net/forums/index.php?topic=28686.msg292750#msg292750][u][color=blue]update information[/color][/u][/url])[/li]
[li]Revised download function for models to improve error handling[/li]
[/list]
[i]0.8.2.8[/i]
[list]
[li]Fixes force update function for models[/li]
[li]Database update for remaining AIA models (excl 727) and FSPXAI 777 v4[/li]
[/list]
[i]0.8.2.7[/i]
[list]
[li]Database update for updated AIA models[/li]
[li]migration of the hotfix in 0.8.2.6[/li]
[/list]
[i]0.8.2.6[/i]
[list]
[li]Hotfix for 0.8.2.5 not collecting any addon data[/li]
[/list]
[i]0.8.2.5[/i]
[list]
[li]Major bug fix in AIGTT <- Recompile Hawaiian and Ohana by Hawaiian[/li]
[li]Improved autorepair of faulty OCI-Installtion (add-on.cfg/add-on.xml)[/li]
[/list]
[i]0.8.2.4[/i]
[list]
[li]Major bug fix --> [u]IMPORTANT:[/u] Please read update information --> [url=https://www.alpha-india.net/forums/index.php?topic=28686.msg291429#msg291429][color=blue]here[/color][/url] <--[/li]
[/list]
[i]0.8.2.3[/i]
[list]
[li]Bug fixes[/li]
[li]Added "Select All" in Unassinged Flightplans Window (Ctrl+A)[/li]
[/list]
New Version is uplaoded to the servers as well as updates for faulty flightplans! Download-Link in the first post ist updated.
How to update:
1) Delete the Resources-Directory in the old directory
2) Copy the content of the Archive into the "old" directory and replace all files
Major Bug fix in v0.8.2.4 applied.
Solves the aircraft not landing issue
(caused by the famous 37min problem - for the experts around)
ATTENTION: How to update from 0.8.2.3 or lower:
Before you start AIM - pls remove all bgl files from "[..]\AIGAIM - OCI\Traffic Files\scenery" and overwrite "FPDatabase.txt" inside with the one attached.
Afterwards reinstall your flightplans the usual way. (Repaints are already installed, so flightplans will just be recompiled)
We have uploaded V0.8.2.5:
- Major bug fix in AIGTT <- Recompile Hawaiian and Ohana by Hawaiian
- Improved autorepair of faulty OCI-Installtion (add-on.cfg/add-on.xml)
attached is a hofix for version 0.8.2.5, it will uplift AIm to 0.8.2.6 and fix a bug were addons could not be loaded
V0.8.2.7 is available now:
- The Database has been updated to support the latest AIA Conversion updates
- Migration of hotfix 0.8.2.6
GO into the OCI Settings menu and press Force Model-Update to install the latest models.
Otherwise they will be installed stepwise when a new flightplan is installed using one of these aircraft.
V0.8.2.8 is available now:
- Fixes force update function for models
- Database update for remaining AIA models (excl 727) and FSPXAI 777 v4
Go into the OCI Settings menu and press Force Model-Update to install the latest models.
Otherwise they will be installed stepwise when a new flightplan is installed using one of these aircraft.
For FSPXAI 777 owners:
remove all "*_L2.dds" textures from the FSPXAI 777 from existing texture folders - for new installed textures OCI will remove them automatically.
v0.8.2.9 is available now.
Update contains:
- AIA B727 series (incl. Super 27)
- RFSL CRJs series (now with Dynamic light)
- RFSL E-Jets (file structur updated)
along with a revised download function for models to improve error handling
Update instructions:1. Remove the following Flightplans (keep the paints!)
- Aeromexico Connect
- Alaska Airlines
- Air Burkina
- Airnorth Regional
- American Eagle
- Austrian Airlines
- BA CityFlyer
- CargoJet
- Croatia Airlines
- Delta Connection
- Eastern Airways
- EgyptAir Express
- Flybe
- Fuji Dream Airlines
- HOP
- Iberia Regional
- Ibex Airlines
- J-Air
- KLM
- LOT Polish Airlines
- Lufthansa Regional
- Luxair
- Oman Air
- Royal Jordanian Airlines
- S7 Airlines
- SAS Scandinavian Airlines
- Tunisair
- United Express
2. Remove all SimObject folders starting with:
- AIGAIM_AIA_B727*
- AIGAIM_RAI_*
3. Reinstall the flightplans previously removed
V0.8.2.10 is available now:
- Bug fix: splitted fligtplans (TFS/FSP) not appearing in unassigned list
V0.8.2.11 is available now:
- Bug fix: Forum Login window did not appear from crawler
Pls read the
update information (https://www.alpha-india.net/forums/index.php?topic=28686.msg292750#msg292750) if you used v0.8.2.8 or lower.
I just uploaded Ethiopian Airlines Su18 v2 including the latest paints by Marco Wolfsegger.
If you are using the payware FSPXAI Boeing 787 models, we recommend removing the v1 flightplan incl. the paints before installing the new one. So the UTT paints get uninstalled.
AIM v0.8.2.12 is available now readytogo
Updates available:
Nauru Airlines Su18 v2: now with new repaints by Ryan Carson
Ethiopian Airlines Su18 v3: now with FSP Max8 by Ryan Carson
Royal Brunei Wi18 v3: fixes FSP 788 installation with OCI
Thanks for the repaints ::cheers::
all files available on the ftp check the replacement window in the lower left corner when the previous version is selected in AIM.
right click --> Install
Hint: you can sort by outdated in the AIM flightplans. The ones with updates available will be marked as "True"
Also please make sure you are using v0.8.2.12 prior installation!
AIM v0.8.2.13 is available now readytogo
- Added support for converted Wi17-18 Flightplans
- Updated user interface in "Flightplan Updates" menu
- minor UI updates
- some bugfixes
IMPORTANT: Before you update to the new version remove the "Resources" folder from your AIM main folder!
AIM v0.8.3.0 is available now readytogo
- Added automatic update check on start up.
- Workaround implemented for failed automatic downloads
Note: AIG Su18 flightplans for Rossiya, Severstal and UTair should now install without problems.
IMPORTANT: If you upgrade from
0.8.2.12 or lower: Please remove the "Resources" folder from your AIM main folder before you update!
AIM v0.8.3.1 is available now readytogo
- major bugfix
- reactivated backup of cfg files
AIM v0.8.3.2 is available now readytogo
We hope the bug is finally fixed now
AIM v0.8.3.3 is available now readytogo
- bugfix: for improved repaint installation
AIM v0.8.3.4 is available now readytogo
- Major bugfix: removing flightplans
There was a major bug when removing flightplans containing the same title multiple times: (Replacement/Substitute).
We are plannig to implement a repair function into the upcoming AIM version.
Pls do
NOT remove the backup files in the aircraft folders in the meantime (aircraft.cfg.aig##)
AIM v0.8.3.5 is available now readytogo
- Major bugfix: removing flightplans
After restarting AIM check your "missing.txt" file in the AIM folder for entries starting with "AIGAIM_*
Pls reinstall the flightplans corresponding to the aircraft listed there.
To do so please delete the flightplans (keep the paints), click "check online" and install the flightplans again.
Except the following titles, which have no repaint assigned:
All user:
AIGAIM_Air Caledonie ATR 72-600 - F-OZIP
AIGAIM_Air Caledonie ATR 72-600 - F-OZLI
AIGAIM_Air Caledonie ATR 72-500 - F-OIPS
AIGAIM_Air Caledonie International De Havilland DHC 6-300 Twin Otter - OC
AIGAIM_IrAero Antonov An-24
AIGAIM_IrAero Antonov An-24 - RA-47821
AIGAIM_IrAero Antonov An-24 - RA-46505
AIGAIM_IrAero Antonov An-24 - RA-08824
AIGAIM_Kam Air McDonnell Douglas MD-83
AIGAIM_Kam Air McDonnell Douglas MD-87
AIGAIM_RAF-Avia Saab 340 - YL-RAG
AIGAIM_RAF-Avia Saab 340 - YL-RAE
Freeware user:
AIGAIM_IrAero Boeing 777-200ER
AIGAIM_Kam Air Airbus A340-300
AIGAIM_Qatar Airways Airbus A350-1000
AIGAIM_Tibet Airlines Airbus A330-200 - 242t
AIM v0.8.3.6 is available now readytogo
- Stockairport list moved to Server - AIM will download the file on startup
AIM v0.8.3.7 is available now readytogo
AIM v0.8.3.8 is available now readytogo
- Bugfix: Force model update function
added support for FSP 777 Stage 4_01
Settings --> Force model update (give it a little time the function does not have an UI yet) :)
AIM v0.8.3.9 is available now readytogo
- Bug fix: Duplicates with TEMP repaints
AIM v0.8.3.10 is available now readytogo
AIM v0.8.3.11 is available now readytogo
- Repair function enabled -> set to use AIGAIM titles only
- Startup improvement
IMPORTANT: when you use the repair function pls check your Log_AIManager.txt files for the titles detected before proceeding.
If something appears you don't want to be fixed by AIM, pls kill AIManger using TaskManager and report in a new topic.
AIM v0.8.3.12 is available now readytogo
- some bugfixes
- multithreading enabled again to improve startup performance
AIM v0.8.3.13 is available now readytogo
- Bugfix: possible packing issue
AIM v0.8.3.14 is available now readytogo
AIM v0.8.3.15 is available now readytogo
- Bugfix Wingspan set to integer values (ft) -> Pls run "Update cfg" in OCI settings menu
AIM v0.8.3.16 is available now readytogo
AIM v0.8.4.0 is available now readytogo
- Database FPs double entries cleaning
- Added ICAO to FP Info
- ModelUpdate UI mit Texture checker (status bar)
- some bugfixes
AIM v0.8.4.1 is available now readytogo
AIM v0.8.4.2 is available now readytogo
- Bugfix: StartUpScreen
- Bugfix: Deleting Fltsim entries in Error window
For FSP A380 users: Pls check Fltsim --> Errors for FSP A380 entries.
If such appear:pls remove the corresponding folder from "AIGAIM - OCI\SimObjects"
and reinstall the flightplans affected (keep the paints when asked)
I reuploaded v0.8.4.2 - there was a little bug regarding update notifications.
If you already installed v0.8.4.2 (before 02 Mar - 11:50 UTC) just download (https://www.alpha-india.net/aigfiles/files/Software/AIG_AIManager_0.8.4.2.zip) it again and overwrite the existing files.
This bug existed since version v0.8.4.0, so if you have this or a later version installed you need to download (https://www.alpha-india.net/aigfiles/files/Software/AIG_AIManager_0.8.4.2.zip) the new version manually.
Sorry for inconveniences.
AIM v0.8.4.3 is available now readytogo
- Automated heavy setting for certain aircraft types
- Bugfix: Error checking
AIM v0.8.4.4 is available now readytogo
- Defunct Airline list added
- Bugfix: some scenery directories were not scanned
- some minor bugfixes
AIM v0.8.4.5 is available now readytogo
- Bugfix: some scenery directories were not scanned
AIM v0.8.4.6 is available now readytogo
- Auto Check Online on startup
- minor UI updates
- bugfixes
AIM v0.8.5.0 is available now readytogo
- Activity Levels can be set up in setting now
- FS reborn lights check implemented (OCI only)
- bugfixes and UI updates
AIM v0.8.5.1 is available now readytogo
- Bugfix for FS reborn lights check
AIM v0.8.5.2 is available now readytogo
- UI update: Available Online -> Updates
- Bugfix activity levels were not saved
AIM v0.8.5.3 is available now readytogo
- added OCI flightplan topic: JCAI
- Bugfix: Refresh list after update install
AIM v0.8.5.4 is available now readytogo
- Bugfix: UI update after FP update
- Bugfix: AIM require second start
- Bugfix: Addon component disabled
AIM v0.8.5.5 is available now readytogo
0.8.5.5
- Bugfix: SimObjects without titles causing troubles
AIM v0.8.5.6 is available now readytogo
- Preparations for 0.9.0.0.
We are proud to announce that:
AIM v0.9.0.0 is available now readytogo
- new feature: Live Timetable
- new feature: Cookie management
- new feature: enhanced payware settings
- new feature: move OCI folder
- update: revised manual flightplan installation
- update: detection FS9 traffic files
- update: status enhancement in flightplan list
- other bugfixes
AIM v0.9.0.1 is available now readytogo
- Bug fix: CTD OCI settings
AIM v0.9.0.2 is available now readytogo
- New Feature: Excluding ship traffic files
- minor bug fixes
AIM v0.9.0.3 is available now readytogo
0.9.0.3
- Bugfix regarding the FPDatabase
AIM v0.9.0.4 is available now readytogo
- Bugfix forum crawler
- Warning for FS9 bgl on FSX/P3D systems
AIM v0.9.0.5 is available now readytogo
AIM v0.9.0.6 is available now readytogo
- forgot to include a minor thing
BTW: Flightplan updates for Nepal Airlines, Joy Air and Lao Skyway are now available.
OCI is now able to update your MA-60 to a P3Dv4 compatible version :)
AIM v0.9.0.7 is available now readytogo
AIM v0.9.1.0 is available now readytogo
- fixing a corrupted upload by Chris
FYI: Some users may experince two updates in a row on next startup. This is intententional and not a bug.
AIM v0.9.1.1 is available now readytogo
AIM v0.9.1.2 is available now readytogo
- OCI-Model Update/Verification feature updated
AIM v0.9.1.3 is available now readytogo
- Optimizations for model updater
AIM v0.9.1.4 is available now readytogo
AIM v0.9.2.0 is available now readytogo
- Feature: added support for AI sound pack
- Bugfix: model updater
to install the sound set just run the "verify model" function in AIM
AIM v0.9.2.1 is available now readytogo
- Bugfix: no oci.xml created for new SimObject
AIM v0.9.2.2 is available now readytogo
- Bugfix: more stable Soundpack download routine
A couple of bug reports showed troubles with the download of the soundpack. We tried to optimize the routine a bit and implemented enhanced feedback in the UI.
AIM v0.9.2.3 is available now readytogo
- Major Bugfix: unused Fltsim function removing too many entries
AIM v0.9.2.4 is available now readytogo
- Smaller bugfixes
- enhanced logger
AIM v0.9.2.5 is available now readytogo
- Bugfix: duplicated titles flightplan update
- Bugfix: Autoupdater
IMPORTANT: If you update from 0.9.2.4 pls manually download the zip file from here (https://www.alpha-india.net/aigfiles/files/Software/AIG_AIManager_0.9.2.6.zip) and overwrite the existing files in your AIM directory
AIM v0.9.2.6 is available now readytogo
0.9.2.6
- Bugfix: Autoupdater
IMPORTANT: If you update from 0.9.2.4 pls manually download the zip file from here (https://www.alpha-india.net/aigfiles/files/Software/AIG_AIManager_0.9.2.6.zip) and overwrite the existing files in your AIM directory.
For a very few users the autoupdater might fail in 0.9.2.5 as well - if you are affected pls do the same as for 0.9.2.4
AIM v0.9.2.7 is available now readytogo
0.9.2.7
- Bugfix: JCAI missing forum flightplans in onlinelist
- Bugfix: Improved Addon Airport detection
AIM v0.9.2.8 is available now readytogo
0.9.2.8
- Bugfix: Modelupdate from AIM-Models
- Feature: Added support for FPDatabase.xml for manual installation
AIM v0.9.2.9 is available now readytogo
0.9.2.9
- [ F ] Added Export-Function for missing fltsim-titles
- [ B ] AILRPE compability after cfg-update fixed (After Model-Update AILRPE needs to rescan!)
- [ B ] unused fltsim not casesensitiv for title
- [ C ] Renumbering will ignore from now on the default SimObject directories
- [ I ] LOG Remove Assigned Fltsim-Entry & Removed Assigned Fltsim-Entry as stack trace
- [ I ] Reworked parts of the Fltsim-Error Check and added "atc_parking_type"-Check
AIM v0.9.2.10 is available now readytogo
0.9.2.10
- [ F ] Updated Soundpack added
AIM v0.9.2.11 is available now readytogo
0.9.2.11
- [ B ] When removing unused Fltsims the texture directory is only deleted when it is not used by any other Fltsim-Entry
- [ B ] Workaround for duplicated titles on some ends in bulk update function
AIM v0.9.2.12 is available now readytogo
0.9.2.12
- [ B ] fixes a missing file in the previouse release
AIM v0.9.2.13 is available now readytogo
0.9.2.13
- [ B ] fixes logolight issue with FSPXAI models - pls run verify/update SImObjects to fix it
AIM v0.9.2.14 is available now readytogo
0.9.2.14
- [ B ] Replacements will be set as unassigned during OCI
- [ B ] Fixed FPDatabase.xml loading error
- [ I ] Repaint reinstalls everytime/on season update
AIM v0.9.3.0 is available now readytogo
0.9.3.0
- [ F ] New user flightplan topic available for OCI - Check your "Flightplan Update" settings to enable!
- [ F ] Move AIGAIM Addon function added
- [ B ] Several Bugfixes
- [ C ] Disabled GantChart (will be back in 1.0)
AIM 0.9.3.0 is hopefully the last public beta of AI Manager. In case of major bugs we will release hotfixes but any new feature will be included in the next public release of AI Manager 1.0.
We like to thank everyone for beta testing AIGAIM and helping us improving the tool over the last year. Currently there is no specific timeline for the AI Manager 1.0 release as there are still some unknown varaibles that might interfear with our current plan :)
Never say never again... ;D
Just a little hotfix for the forum crawler.
AIM v0.9.3.1 is available now readytogo
0.9.3.1
- [ B ] Hotfix forum crawler
AIM v0.9.3.2 is available now readytogo
0.9.3.2
- [ C ] Check your update setting for Forum Members flightplans!
- [ F ] Preparation for OCI-GA Flightplans
- [ B ] General Bug-fixes
AIM v0.9.3.3 is available now readytogo
0.9.3.3
- [ B ] multiple general sections with MD-80 -> fixed after verify/update
- [ B ] special characters in defunct list
AIM v0.9.3.4 is available now readytogo
0.9.3.4
- [ B ] major bugfix for update simobject function -> Pls run verify/update SimObjects to fix it!
AIM v0.9.3.5 is available now readytogo
0.9.3.5
- [ I ] Better FSReborn Lights Professional integration
- [ B ] Bug fixes
AIM v0.9.3.6 is available now readytogo
0.9.3.6
- [ B ] OCI setup corrupted message when faulty addon.cfg entries
- [ I ] FSreborn handling
AIM v0.9.3.7 is available now readytogo
0.9.3.7
- [ B ] Oldest possible season set to 2008
- [ I ] Modelupdate process has been reworked
AIM v0.9.3.8 is available now readytogo
0.9.3.8
- [ B ] Fixes "Skip Model"-Install option
- [ F ] Rescan addon airports button
AIM v0.9.3.9 is available now readytogo
0.9.3.9
- [ B ]update didn't appear for renamed flightplans
AIM v0.9.3.10 is available now readytogo
0.9.3.10
- [ B ]fltsim updates along with FP update (without paint install)
- [ B ]fix for duplicated and fsx IDs in oci.xmls
- [ B ]applying parking-type changes set in the FP
- [ B ]fixes missing local texture fallback directories on verify process
AIM v0.9.3.11 is available now readytogo
0.9.3.11
- [ B ]fixes index bug causing verify function to fail
AIM v0.9.3.12 is available now readytogo
0.9.3.12
- [ B ]fixes bug in splitting routine of verify process
AIM v0.9.3.13 is available now readytogo
0.9.3.13
- [ B ]hot fix for splitting routine in verify process
AIM v0.9.3.14 is available now readytogo
0.9.3.14
- [ B ]autofix for corrupted splitting process - verify
AIM v0.9.3.15 is available now readytogo
0.9.3.15
- Note: P3Dv5 compability is still WIP and not included in this update
- [ B ]Hotfix: cleaning cache for DB updates
AIM v0.9.4.0 is available now readytogo
0.9.4.0
- [ F ]Added v5 Support (SimObjects have not been upgraded yet!)
AIM v0.9.4.1 is available now readytogo
0.9.4.1
- [ B ]startup fix for autoupdater
- [ B ]extended logger
AIM v0.9.4.1 is available now readytogo
0.9.4.1
- [ B ]startup fix for autoupdater
- [ B ]extended logger
AIM v0.9.4.2 is available now readytogo
0.9.4.2
- [ B ] Fix while detecting Installed FS Versions
AIM v0.9.4.3 is available now readytogo
0.9.4.3
- [ B ] Fix Bug regarding freeware/payware settings for SimObjects
AIM v0.9.4.4 is available now readytogo
0.9.4.4
- [ B ] Move OCI setup to another drive
AIM v0.9.4.5 is available now readytogo
0.9.4.5
- [ B ] Fixes a possible bug that causes the remove of all SimObjects when migrating from P3Dv4 to P3Dv5
AIM v0.9.4.6 is available now readytogo
0.9.4.6
- [ B ] Bug fix on startup when more then one simulator is installed, but last selected FS has been removed
AIM v0.9.4.7 is available now readytogo
0.9.4.7
- [ B ] Bug fix remove old ModelIDs
AIM v0.9.4.8 is available now readytogo
0.9.4.8
- [ B ] Fixed crash when for FSX no SimObject-Directories were set
AIM v0.9.4.9 is available now readytogo
0.9.4.9
- [ B ] Fixed bug regarding P3D identification on startup
AIM v0.9.4.10 - 12 is available now readytogo
0.9.4.10 - 12
- [ B ] Hotfix: faulty registry value name
AIM v0.9.4.13 is available now readytogo
0.9.4.13
- [ B ] Hotfix: sim detection P3Dv1-3
AIM v0.9.4.14 is available now readytogo
0.9.4.14
- [ I ] Disableing of duplicated effects when using FSReborn AI Lights Prof.
AIM v0.9.4.15 is available now readytogo
0.9.4.15
- [ B ] Hotfix for Databases
- [ B ] Hotfix for Updater
AIM v0.9.4.16 is available now readytogo
0.9.4.16
- [ B ] Hotfix for corrupted wing spans
Pls run verify/update SimObects in order to get it fixed
AIM v0.9.4.17 is available now readytogo
0.9.4.17
- [ B ] Hotfix texture installation
AIM v0.9.4.18 is available now readytogo
0.9.4.18
- [ F ] Autorepair missing fltsim titles
AIM v0.9.4.19 is available now readytogo
0.9.4.19
- [ I ] Improved Autorepair routine
AIM v0.9.4.20 is available now readytogo
0.9.4.20
- [ I ] Fix case sensetivity for air files
AIM v0.9.4.21 is available now readytogo
0.9.4.21
- [ I ] Added OCI Status-Report
AIM v0.9.4.22 is available now readytogo
0.9.4.22
AIM v0.9.4.23 is available now readytogo
0.9.4.23
- [ I ] improved GCmap handling
AIM v0.9.4.24 is available now readytogo
0.9.4.24
- [ B ] Bugfix in relation to AILRP Effects
AIM v0.9.5.0 is available now readytogo
0.9.5.0
- [ C ] Update for the Softwareupdater
-> This will be the last update for 0.9 - and yes this time we are sure because of reasons. :stirpot:
We have lift AIM out of the BETA ::cheers:: Todays release contains the last major improvements we had planed for OCI so we feel good to say this is our 1.0.X release to the public. We will not stop the development of AIM now, so many things are still planed or need some updates ;)
1.0 bringt this main features:
1.0.1.0
- [ F ] AIGFP Support
- [ F ] OCI GVP File
- [ F ] OCI Airport Installer
- [ I ] Updated UI
- [ B ] Many smaller bug fixes
AIM v1.0.1.1 is available now readytogo
1.0.1.1
- [ C ] Improved logger for startup problems
- [ B ] Minor UI fixes
AIM v1.0.1.2 is available now readytogo
1.0.1.2
- [ B ] Fixes a bug in the install process for AIGFP exclusive -> https://www.alpha-india.net/forums/index.php?topic=34310.0
AIM v1.0.1.3 is available now readytogo
1.0.1.3
- [ B ] Fixed a bug that could cause non OCI flightplan to get corrupted while recompiling with new Airport OCdes (if you have this problem please recompile with AIFP!)
- [ B ] Fixed the Select Button for the ORBX Packs
- [ B ] Fixed a bug that could prevent an OCI installation for some airlines
AIM v1.0.1.4 is available now readytogo
1.0.1.4
- [ B ] Fixed a bug for FSX users, that caused no SimObject/Flightplan to load
AIM v1.0.1.5 is available now readytogo
1.0.1.5
- [ I ] Series UI updates
- [ B ] Smaller Bug fixes
AIM v1.0.1.6 is available now readytogo
1.0.1.6
- [ I ] Improved error detection on startuup for the OCI addon (Stuck at loading configuration)
AIM v1.0.1.7 is available now readytogo
1.0.1.7
- [ B ] Fixed a bug for FSX users, that caused no Flightplan to load
AIM v1.0.1.8 is available now readytogo
1.0.1.8
- [ I ] Improved ATC file handling
AIM v1.0.1.9 is available now readytogo
1.0.1.9
- [ B ] Bug fixed that could cause missing fltsims in OCI after AIM restart
AIM v1.0.1.10 is available now readytogo
1.0.1.10
- [ B ] Bug fixed that caused CTD on startup
AIM v1.0.1.11 is available now readytogo
1.0.1.11
- [ B ] Bug fixed regarding AIGFP filenames on manual installation
AIM v1.0.1.12 is available now readytogo
1.0.1.12
- [ C ] Upgraded backend for new Database
- [ B ] Bug fixed regarding FS selection on startup (MSFS no longer selectable)
- [ B ] Bug fixed regarding AIGFP filenames on manual installation
AIM v1.0.1.13 is available now readytogo
1.0.1.13
- [ B ] Bug fixed regarding AIGFP filenames on manual installation
AIM v1.0.1.14 is available now readytogo
1.0.1.14
- [ B ] Bug fixed regarding FSP freeware models beeing updated to payware
If you have this bug, please delete the FSP SimObjects and ran a verify setup
AIM v1.0.1.15 is available now readytogo
1.0.1.15
- [ B ] Bug fixed that could cause reinstall of all airlines when running verify setup
AIM v1.0.1.16 is available now readytogo
1.0.1.16
- [ B ] Bug fixed with the FSP 787
AIM v1.0.1.17 is available now readytogo
1.0.1.17
- [ B ] Bug fixed that cause crash for OCI installation
- [ B ] Bug fixed on Startup (reading BGL or AIGFP)
AIM v1.0.1.18 is available now readytogo
1.0.1.18
- [ B ] Bug fixed that cause crash for OCI installation
AIM v1.0.1.19 is available now readytogo
1.0.1.19
- [ B ] Install Flightplan as AIGFP will now close the window
- [ B ] Fixed some CTD crashes in the UI
AIM v1.0.1.20 is available now readytogo
1.0.1.20
- [ B ] Fixed CTD/endless loop "Loading Flightplans"
AIM v1.0.1.21 is available now readytogo
1.0.1.21
- [ I ] Improved reading Airport BGL files
AIM v1.0.1.22 is available now readytogo
1.0.1.22
- [ F ] Autodetection if LongPath is not enabled, incl. option to enable it.
- [ I ] Improved Addon-Airport loading.
- [ I ] Reduced cache size for airports.
- [ I ] Improved UI/Info regarding ORBX-Pack.
- [ B ] Fixed bug that causes problem when ORBX should not be used.
- [ B ] Fixed a CTD when loading a flightplan.
AIM v1.0.1.23 is available now readytogo
1.0.1.23
- [ I ] Added UI support for "Shift+Left Click" in the online flightplan list
- [ B ] Fixed failing Airport-Code fix on startup
AIM v1.0.1.24 is available now readytogo
1.0.1.24
- [ I ] Improved self repair function for corrupted simobjects
- [ C ] Increased timer limit for addon airport collector
AIM v1.0.1.25 is available now readytogo
1.0.1.25
- [ B ] Fixed CD on startup
- [ B ] Fixed faulty model installation in cases the fileextension was "AIR"
AIM v1.0.1.26 is available now readytogo
1.0.1.26
- [ C ] Added new online source for flightplans (AIG FTP for Military)
- [ B ] Fixed CTD on startup
AIM v1.0.1.27 is available now readytogo
1.0.1.27
- [ F ] Option to skip manual downloads during bulk installation of OCI
- [ C ] Smaller UI Changes
- [ B ] Fixed CTD on startup because of WCF
- [ B ] General fixes in the backend core files (AIGCommon)
AIM v1.0.1.28 is available now readytogo
1.0.1.28
- [ C ] Removed all support for MAIW hosted/developed models (incl. PAI C-17 / JYAI BE300 / JYAI H145 / MKAI CASA C-295)
AIM v1.0.1.29 is available now readytogo
1.0.1.29
AIM v1.0.2.0 is available now readytogo
1.0.2.0
- [ F ] Option added to skip airport-check for non OCI flightplan on startup (Settings->Flightplan Settings)
- [ C ] UI Changes during the OCI installation and the detailed flightplan window
- [ I ] Improved SimObject Verification performance
- [ B ] Fixed bugs that happend in the beckend when updating from v4 to v5 models (run verify setup to get the repair)
- [ B ] Fixed a bug that cuases problems when windows was not installed on C:\
- [ B ] Fixed missing UTC Time for LiveTimetable
AIM v1.0.2.1 is available now readytogo
1.0.2.1
- [ B ] Fixed Bug that causes missing fltsim-tiles in OCI when the replacement uses switch-words
AIM v1.0.2.2 is available now readytogo
1.0.2.2
- [ I ] Chaged UI for payware-selection in OCI Settings
- [ I ] AIM is identifing missing textures in OCI now and removes the fltsim entry. So a reinstall is forced to get the correct repaint.
- [ B ] Fixed Bug that causes invalid AIG.xml files
AIM v1.0.2.4 is available now readytogo
1.0.2.4
- [ B ] Fixed CTD on verify setup
1.0.2.3
- [ B ] Fixed faulty ui_createdby entry (Verify will repair the faulty once)
AIM v1.0.2.5 is available now readytogo
1.0.2.5
- [ C ] Workaround added for atc_heavy Bug in P3D (requires to run verify again)
AIM v1.0.2.6 is available now readytogo
1.0.2.6
- [ B ] fixed missing atc_heavy (requires to run verify again)
AIM v1.0.2.7 is available now readytogo
1.0.2.7
- [ B ] Fixed extra " " on some fltsim tiltes
AIM v1.0.2.8 is available now readytogo
1.0.2.8
- [ B ] Fixed ORBX Pack installation
If you have issues, remove via AIM all temp models (OCI settings)
AIM v1.0.2.9 is available now readytogo
1.0.2.9
- [ B ] Fixed CTD caused by Cookie Window
- [ B ] Fixed Cache generation
AIM v1.0.2.10 is available now readytogo
1.0.2.10
- [ B ] Fixed faulty repaint installation
AIM v1.0.2.11 is available now readytogo
1.0.2.11
- [ B ] Fixed faulty repaint installation
Quote from: Kaiii3 on October 11, 2021, 04:34:58 PM
AIM v1.0.2.12 is available now readytogo
1.0.2.12
- [ I ] Improved AIGTC Airport-File installation for 3rd party airports
1.0.2.13
- [ B ] Fixed an error in the OCI-Airport installation
1.1.1.7- [ B ] Smaller Bug fixes in the backend
1.1.1.9- [ I ] Improved OCI installation for Repaints containing P3D and MSFS textures
- [ I ] Improved "Verify Setup" logic to identify errors inside the OCI installation
- [ B ] Smaller Bug fixes in the backend
1.1.1.11- [ F ] Added support for new MSFS native Sounds by FSim+
- [ B ] Fixed issues during verify setup for some MSFS SimObjects
1.1.1.12- [ B ] Fixed issues preventing the update of the AIG Effects (MSFS only)
1.2.0.6- [ B ] Fixed issues preventing the a bulk install for fixing missing repaints
- [ B ] Fixed UI issue always shwoing the SimObject update button in P3D
1.2.0.9- [ F ] Added support for atc_id-Fltsim entry for special liveries. (Run verify Setup to fix your current installation)
- [ C ] Adjusted airline-logo loading to reduce load on the Webserver
1.2.0.13- [ B ] Several crash fixes
1.2.0.14- [ B ] Fixed endless loop caused by faulty ModelBehavior-File on the server
1.2.0.16- [ C ] Adjusted Log-File output for better error identification
- [ B ] Fixed issue with P3Dv6 Model installations
1.2.2.13- [ F ] Added DynFP support
- [ F ] Added support for generic OCI paints
- [ F ] Added support for new AIG VisLib
- [ F ] Added support for new AIG Model structure
- [ B ] Smaller bug fixes
1.2.2.14- [ B ] Fixed in some cases non working UI Progress-Bar on Model-Update
- [ B ] Fixed in some cases crash after Verify-Setup
1.2.3.0- [ C ] Some smaller changes to DynFP for release
1.2.3.2- [ I ] Added two "fail-safe" checks to prevent users from accidentally remove the OCI addon
1.2.3.5- [ I ] Added support for new DynFP features
- [ B ] Several smaller bug fixes
1.2.3.6- [ C ] Smaller changes to the UI
1.2.3.7- [ C ] Some smaller UI changes
- [ C ] Removed FSX and FSX:SE from Dropdown selection on startup
- [ B ] Fixed an issue for some older URLs on servers that are now offline
1.2.3.8- [ B ] Fixed bugs while updating OCI SimObject
1.2.3.9- [ C ] Repaints of GA-C airplanes will get a default BJO-Parking code added if not already included (run verify to set the code for installed airplanes)
- [ B ] Fixed bug causing OCI to install faulty cfg files in model updates