Text only | Text with Images

Alpha India Group

Alpha India Group => TC - Support => AIG Traffic Controller => AIG Software => TC Solved Issues => Topic started by: espresso on December 11, 2021, 10:04:20 PM

Title: [CLOSED] Traffic Controller P3Dv5.3 - No traffic injected on first startup
Post by: espresso on December 11, 2021, 10:04:20 PM
Dear Support Team,

I have recently updated my P3D to v5.3. I did a full reinstall of the sim, but left AIM and TC as they were. After finishing the reinstall I verified the installation, the textureformat, reset the SimObjects and recompiled all the flightplans.

So here's my issue: After starting P3D, Traffic Controller is automatically started, but it doesn't inject any traffic. Only after restarting TC, restarting P3D or changing the time and/or location in-sim traffic starts being injected.

Any help would be greatly appreciated! Many thanks in advance!
Title: Re: Traffic Controller P3Dv5.3 - No traffic injected on first startup
Post by: espresso on December 11, 2021, 10:24:39 PM
Here are the logs, I hope the right ones.
Title: Re: Traffic Controller P3Dv5.3 - No traffic injected on first startup
Post by: Kaiii3 on December 12, 2021, 09:04:14 AM
fix for that is WIP at the moment ;)
Title: Re: [WIP] Traffic Controller P3Dv5.3 - No traffic injected on first startup
Post by: espresso on December 12, 2021, 09:19:43 AM
So this i a known bug?
Title: Re: [WIP] Traffic Controller P3Dv5.3 - No traffic injected on first startup
Post by: Kaiii3 on December 12, 2021, 09:23:38 AM
Quote from: espresso on December 12, 2021, 09:19:43 AM
So this i a known bug?

one reason for this is known. There might be some other issues I have not yet reproduce on my system...
Title: Re: [WIP] Traffic Controller P3Dv5.3 - No traffic injected on first startup
Post by: espresso on December 12, 2021, 09:59:45 AM
Ok! Thanks a lot for the quick answer!
So there is nothing I can do on my end at the moment other than wait for an update?
Title: Re: [WIP] Traffic Controller P3Dv5.3 - No traffic injected on first startup
Post by: Kaiii3 on December 12, 2021, 11:25:04 AM
you can disable the addon (AIGTC) in P3D, so it does not start on startup, and then start AIGTC yourself when the flight is loaded
Text only | Text with Images