Main Menu

Some observations FYI

Started by Psybear, August 20, 2020, 06:01:30 PM

Previous topic - Next topic

Psybear


While the flap and slat action is working, the same AI seem to have no aileron, rudder or elevator movement, why?
Singapore A350-900 taxis and takes off with engines in reverse and spoilers deployed.

Best regards,
Clayton
Win10 Pro x64 21H2 | P3Dv5.3 HF2 | AIM 1.0.1.8 / TC  0.3.2.0 | AILR Pro 1.21.0 | STB-DS 5.0.2020.17800 | EVP XL 6.3.1 | SODE 1.7.1 | FSUIPC  6.1.9 | ASP3D b8

Kaiii3

model? developer? and other Addon running that interact with the SimObjects? There are reports that Supter Traffic Board can cause this with FSPX models

Psybear

Hi Kaiii,

None of the AI have aileron, rudder or elevator movement. No matter the model or developer.

As for the engine reversers and spoilers, yeah it's probably STB. Simon has been working on it.

Clayton
Win10 Pro x64 21H2 | P3Dv5.3 HF2 | AIM 1.0.1.8 / TC  0.3.2.0 | AILR Pro 1.21.0 | STB-DS 5.0.2020.17800 | EVP XL 6.3.1 | SODE 1.7.1 | FSUIPC  6.1.9 | ASP3D b8

johanfrc

Psybear, have you tried to see if the same happens when using i.e. the AI Companion? That program ahve the same arrival/departure table as STB. If it don't happen in that program, then you know it's because of STB:
https://www.alpha-india.net/forums/index.php?topic=29651.0
Regards

Johan Clausen

gsnde

Set flap handling to 0 in the STB options and all is good.

From mobile hence short

Cheers,
Martin

________________________________________________________________________________________________
The Owl's Nest * Military Aircraft Reference * ICAO Reference * Distance Calculator * MAIW & Military AI Reference

Psybear

Thanks Johan. Unfortunately I find AI Companion to be utterly confusing and instructions thin on the ground.  I've managed to connect on a basic level by guesswork and intuition on the same machine, but when it comes to actually viewing AI, all I get is a sky blue screen.

If I ever do get this figured out I would be running it on a networked machine along side ASP3D and AI Controller which are working in that configuration.

Maybe it I hit it, or perhaps my head with a hammer, I'll figure this out. ::ashamed::
Win10 Pro x64 21H2 | P3Dv5.3 HF2 | AIM 1.0.1.8 / TC  0.3.2.0 | AILR Pro 1.21.0 | STB-DS 5.0.2020.17800 | EVP XL 6.3.1 | SODE 1.7.1 | FSUIPC  6.1.9 | ASP3D b8

Psybear

Thanks Martin.

Understand on mobile.

But globally or specifically for that particular aircraft?

Clayton
Win10 Pro x64 21H2 | P3Dv5.3 HF2 | AIM 1.0.1.8 / TC  0.3.2.0 | AILR Pro 1.21.0 | STB-DS 5.0.2020.17800 | EVP XL 6.3.1 | SODE 1.7.1 | FSUIPC  6.1.9 | ASP3D b8

gsnde

It's a global setting. Simon added it once I send him screen shots of Fighters starting with chutes deployed a long time ago..

From mobile hence short

Cheers,
Martin

________________________________________________________________________________________________
The Owl's Nest * Military Aircraft Reference * ICAO Reference * Distance Calculator * MAIW & Military AI Reference

Psybear

Once again thanks lads for suggestions but once again no problem with flaps/slats. The problem lies with ailerons, elevators and rudder. There simply is no simulation of these which even MyTraffic had ages ago.

Clayton
Win10 Pro x64 21H2 | P3Dv5.3 HF2 | AIM 1.0.1.8 / TC  0.3.2.0 | AILR Pro 1.21.0 | STB-DS 5.0.2020.17800 | EVP XL 6.3.1 | SODE 1.7.1 | FSUIPC  6.1.9 | ASP3D b8